An Introduction to Filters
In the operation of electronic systems and circuits, the basic function of a filter is to selectively pass, by frequency, desired signals and to suppress undesired signals. The amount of ...
An Introduction to Frequency Multipliers
Mini-Circuits' frequency multipliers offer a new degree of freedom in designing frequency multiplier chains. Their multi-octave band width and excellent rejection of fundamental and third ...
DAT-31R5A/31A/15R5A Series Evaluation Boards Operation to VDD=5.2V
Mini-Circuits DAT series of 50Ω digital step attenuators support a wide variety of configurations including attenuation range, step size and operating power supply voltages. Read further for more
Band-pass Filters with Linear Phase Response
Filters with linear phase response are desirable, due to their flat group delay, in many applications, for example in image processing and digital data transmission. Such filters maximally ...
DIY Low-Cost Power Splitters
There is a continuing demand to reduce the cost and increase the performance and quality at the same time. Mini-Circuits is working to satisfy these goals and has introduced a new splitter series
Super Wide-band RF Choke
Use of heterojunction bipolar transistor technology has resulted in development of super wide-band monolithic microwave amplifiers such as Mini-Circuits ERA series. These amplifiers cover a ...
High Power Limiter Modules
In many applications, front end filtering is used to protect the receiver from unwanted high-power signals, but even with this reinforcement, high-power signals may still be present. A limiter ...
Mini-Circuits 2 and 5W Attenuators Display Tight Tolerance in the Broad DC to 18 GHz Band
The need for cost effective, high performance components is greater than ever. Mini-Circuits is meeting that demand with the introduction of three families of low cost precision fixed attenuators.
Frequently Asked Questions About Power Splitters/Combiners
Frequently asked questions about power splitters/combiners will address general concerns as well as specific applications.
Terms and Definitions: Filters
All the terms you need to know to make informed decisions on the right filter for your application.
Characterizing and Minimizing VCO Phase Noise
The term phase noise is widely used for describing short term random frequency fluctuations of a signal. Frequency stability is a measure of the degree to which an oscillator maintains the same ...
An Introduction to Limiters
Mini-Circuits' limiters cover a very broad frequency range from 3 KHz to 900 MHz, dynamic range from +3 to +20 dBM, and provide exceptionally hard limiting of 0.05 dB output change per dB input change.