by minicircuitsadmin | Jun 9, 2021 | Amplifiers, Attenuators, Directional Couplers, Engineering Resources, Filters, Fixed Attenuators / Terminations, Frequency Doublers, Frequency Mixers, Power Splitters / Combiners, RF Transformers, Surface Mount Assembly & Manufacturing Techniques, Switches
Radhakrishna Setty, Technical Advisor Introduction Semiconductors are ubiquitous in modern society. In addition to microprocessors for computing technologies, they are used in practically every active wireless communications system including cell phone towers, cell...
by minicircuitsadmin | Jun 30, 2020 | Engineering Resources, Filters, Frequency Doublers
Overview Frequency translation devices such as multipliers and dividers are used to convert frequencies from lower spectrum regimes to higher frequencies, and vice versa. As these devices are intrinsically non-linear, they generate spurious harmonics, which are often...
by minicircuitsadmin | Jul 11, 2015 | Engineering Resources, Frequency Doublers
Mini-Circuits’ frequency multipliers offer a new degree of freedom in designing frequency multiplier chains. Their multi-octave band width and excellent rejection of fundamental and third harmonics enable a significant reduction in filter requirements. In...
by minicircuitsadmin | Mar 11, 2015 | Engineering Resources, Frequency Doublers, Terms
Frequency doubler A non-linear device that efficiently produces an output that is twice the frequency of the signal applied to its input. Conversion loss Conversion loss is a measure of the difference in power level between input signal F1, and output signal F2...
by minicircuitsadmin | Mar 6, 2015 | Engineering Resources, Frequency Doublers, Q/A
Q. How does the return loss at the output of a frequency doubler vary as input power changes? A. Return loss is influenced by how hard the diodes are driven in their conducting state. As input power to the frequency doubler is reduced, the impedance will increase. It...
You must be logged in to post a comment.