• Return to MiniCircuits.com
  • 
  • 
  • 
  • 
  • 
Mini-Circuits Blog
  • Engineering Resources
  • Industry Insights
  • Mini-Circuits Life
Select Page

Understanding Surface-Mount

by minicircuitsadmin | Dec 20, 2017 | Engineering Resources, Surface Mount Assembly & Manufacturing Techniques

The main reason for the utilization of surface mount technology today is for PWB area efficiency and the corresponding reduction of the system volume. Small surface mount components are used to manufacture electronic assemblies that are significantly smaller than the...

Interface Dimension Measuring Gauge

by minicircuitsadmin | Dec 5, 2017 | Engineering Resources, Surface Mount Assembly & Manufacturing Techniques

Introduction Mini Circuits manufactures a comprehensive line of connector gauges for measuring the critical interface dimensions of coaxial connectors .Testing the interfaces of connectors on any device at incoming inspection is not only highly recommended, it is...

A Guide to Surface-Mount Assembly

by minicircuitsadmin | Mar 31, 2017 | Engineering Resources, Surface Mount Assembly & Manufacturing Techniques

Figure 1: Examples of components soldered to circuit boards. What automated soldering methods can be considered for Mini-Circuits surface-mount components? There are two basic methods: reflow and wave soldering. Generally, reflow soldering can be done when (1) there...

Impact of Date Code Age Restrictions on Quality, Service, and Value

by minicircuitsadmin | Feb 23, 2017 | Engineering Resources, Surface Mount Assembly & Manufacturing Techniques

Introduction Extensive studies done by industry leaders, NASA and the U.S. military have shown substantial evidence that in modern storage environments, time intervals of five years or longer between manufacture of components and shipment to OEMs pose virtually no...

Small Quantity Tape and Reel Splicing

by minicircuitsadmin | Nov 16, 2016 | Engineering Resources, Surface Mount Assembly & Manufacturing Techniques

I. Mini-Circuits’ Innovative Tape and Reel Process Several years ago, Mini-Circuits CEO, Harvey Kaylie identified a void in the market: customers who were unable to justify purchasing a full-reel quantity of surface-mount components, but wanted smaller...
« Older Entries

Mini-Circuits

13 Neptune Ave
Brooklyn, NY 11235 - USA
+1 (718) 934 4500
sales@minicircuits.com
Monday - Friday | 7:00am - 5:30pm - ET

Mini-Circuits

13 Neptune Ave
Brooklyn, NY 11235
+1 (718) 934 4500
sales@minicircuits.com
M-F - 7:00am - 5:30pm - ET

Tags

#powersensors #testsolutions 5G 6G 90 Degree Hybrid ADCs Amplifiers Applications Attenuator Balanced Amplifiers Baluns Bandpass Base Stations Biasing Broadband Cables CATV Compression Die Differential Circuits Digital Step Attenuator Directional Couplers DIY Drone Technology Dynamic Range Electronic Attenuator Electronic Line stretchers Engineering Equalizer ESD FAQ Filters Fixed Attenuators Fixed Attenuators/Terminators Frequency Doublers Frequency Mixer GPS Hi-Rel High-Power High Power Amplifier I&Q and QPSK Modulators/Demodulators Impedance Industry Insights Inside Mini-Circuits IP3 ISO 9001 Limiters Low Noise Amplifier Lowpass Filters LTCC LTE Manufacturing Matching Measurement Medical Applications MMIC mmWave Multipliers Network Analyzer Phase Phase Detectors Power Handling Power Sensors Power Splitters/Combiners Q/A Quadrature Quality Quantum Computing Radio History Reflectionless Filters RF Choke RF Energy RF Transformers Satellite Semiconductor Soldering Space Splicing Stability Storage Surface-Mount Switches Synthesizer Terminations Terms & Definitions Test Board Test Solutions Transformers Transistor Ultra-Wideband UWB VCOs VNA
  • Return to MiniCircuits.com
  • Privacy Policy
  • © Mini-Circuits 2020 – All Rights Reserved
 

Loading Comments...
 

You must be logged in to post a comment.