by minicircuitsadmin | Oct 19, 2021 | Amplifiers, Engineering Resources
Overview Mini-Circuits’ TSS- and TSY-families of MMIC amplifiers feature a versatile combination of performance characteristics including high dynamic range and very low noise figure with wideband frequency coverage from VHF up to mmWave applications. These product...
by minicircuitsadmin | Sep 23, 2021 | Amplifiers, Engineering Resources, Surface Mount Assembly & Manufacturing Techniques
Radha Setty, Technical Advisor Introduction Pseudomorphic High-Electron-Mobility-Transistor (pHEMT) is one technology Monolithic Microwave Integrated Circuit (MMIC) designers and fabs use to develop and manufacture microwave integrated circuits. pHEMT has gained...
by minicircuitsadmin | Sep 8, 2021 | Amplifiers, Engineering Resources
Introduction Meeting gain roll-off and gain flatness requirements over frequency is a common problem in many modern-day discrete RF transceivers. Ideally, the gain in the signal path of an RF transceiver should be flat over frequency in the band of interest. However,...
by minicircuitsadmin | Aug 25, 2021 | Attenuators, Engineering Resources, Measurement Methods & Techniques, Switches
Lee Whiting, Application Manager, Mini-Circuits Europe A mesh network is a wireless network architecture in which three or more devices, also called nodes, are all connected to each other. Every node in the mesh network is able to communicate with some or all of the...
by minicircuitsadmin | Aug 20, 2021 | Engineering Resources, Filters
Low Temperature Co-fired Ceramic (LTCC) substrate technology is one major area of Mini-Circuits’ R&D investment. As a result of its long-term investments in materials, manufacturing processes, simulation and testing capability, research on novel circuit...
by minicircuitsadmin | Jul 30, 2021 | Engineering Resources, Measurement Methods & Techniques, Switches
ZTM-series modular test systems consist of individual hardware modules that are easy to swap out and reconfigure as needed. A wireless communications equipment manufacturer needed a switching system for signal routing in a test application. This company produced a...
You must be logged in to post a comment.