by minicircuitsadmin | Jun 5, 2015 | Attenuators, Engineering Resources
Background: The Mini-Circuits DAT series is specified to operate with supply voltages over the range of 2.7V to 3.3V. When operating over this range, the parts meet all their specified performance parameters over the operating environmental ranges. However, under...
by minicircuitsadmin | May 13, 2015 | Attenuators, Engineering Resources, Q/A
About Digital Step Attenuators Q. Suppose I don’t work at less than the specified 1 dB compression of a step attenuator, what are the consequences? A. Should you exceed the specified compression, typically given at 0 dBm input, harmonics will be generated which...
by minicircuitsadmin | May 11, 2015 | Attenuators, Engineering Resources, Terms
Insertion Loss: Must be defined at a particular value of control-current. The minimum insertion loss for Mini-Circuits’ units is the difference in power from input to output with 20 mA at the control port. In-out Isolation: Defined as the insertion loss of the...
by minicircuitsadmin | Apr 8, 2015 | Attenuators, Engineering Resources
DAT attenuator (surface mount). Connectorized DAT attenuator (ZX76 Series). Connectorized DAT attenuator ZX76-31R5-PN attenuator with parallel control cable and connector (left) and without interface connector (right). Introduction Mini-Circuits new series of digital...
by minicircuitsadmin | Apr 4, 2015 | Attenuators, Engineering Resources
Precision TTL-controlled step attenuators, accurate over 10 to 1000 MHz and -55 to +100°C, are available from Mini-Circuits in hermetically-sealed TO-8 cases and SMA connectorized packages. In each package style, five models are offered, each with three internal...
You must be logged in to post a comment.