by minicircuitsadmin | Dec 8, 2022 | Amplifiers, Attenuators, Engineering Resources, Filters, Frequency Mixers
The predecessor to this article reviewed cascade analysis for P1dB and IP3 in a simple, three-component receiver front-end. In that example, the LNA was the only non-linear component in the system, significantly simplifying calculations for linearity parameters. The...
by Rinchen Athup | Nov 17, 2022 | Filters, Product Updates
PATENTED TECHNOLOGY Reflectionless Filters Eliminate Spurs & Intermods Mini-Circuits’ reflectionless filters are the only commercially available filters that absorb and internally terminate stopband signals rather than reflecting them back up the signal chain....
by minicircuitsadmin | Nov 15, 2022 | Amplifiers, Attenuators, Engineering Resources, Filters, Fixed Attenuators / Terminations, Frequency Mixers
A prior article in this series explained cascade analysis of noise level, noise floor, bandwidth and signal-to-noise ratio for a simple RF front end with a single gain stage. In this application note, we’ll build on the same concept to guide the designer though...
by Rinchen Athup | Nov 10, 2022 | Amplifiers, Attenuators, Cables, Directional Couplers, Equalizers, Filters, Frequency Mixers, Frequency Multipliers, Phase Detectors, Power Splitters / Combiners, Product Updates, RF Transformers
100+ KITS | 11 PRODUCT LINES Designer Kits For All Your Lab and Prototyping Needs Mini-Circuits offers a wide selection of designer kits featuring handy combinations of components in small quantities for a great value. Whether you’re stocking up on essentials...
by minicircuitsadmin | Sep 30, 2022 | Amplifiers, Attenuators, Engineering Resources, Filters
When examining a device data sheet, linearity parameters P1dB and IP3 are straightforward and relatively easy to apply during the design process. Once several components are connected in series in a design, complex equations governing cascaded P1dB and IP3 must...
You must be logged in to post a comment.