by minicircuitsadmin | May 13, 2015 | Attenuators, Engineering Resources, Q/A
About Digital Step Attenuators Q. Suppose I don’t work at less than the specified 1 dB compression of a step attenuator, what are the consequences? A. Should you exceed the specified compression, typically given at 0 dBm input, harmonics will be generated which...
by minicircuitsadmin | May 11, 2015 | Attenuators, Engineering Resources, Terms
Insertion Loss: Must be defined at a particular value of control-current. The minimum insertion loss for Mini-Circuits’ units is the difference in power from input to output with 20 mA at the control port. In-out Isolation: Defined as the insertion loss of the...
by minicircuitsadmin | Apr 8, 2015 | Attenuators, Engineering Resources
DAT attenuator (surface mount). Connectorized DAT attenuator (ZX76 Series). Connectorized DAT attenuator ZX76-31R5-PN attenuator with parallel control cable and connector (left) and without interface connector (right). Introduction Mini-Circuits new series of digital...
by minicircuitsadmin | Apr 4, 2015 | Attenuators, Engineering Resources
Precision TTL-controlled step attenuators, accurate over 10 to 1000 MHz and -55 to +100°C, are available from Mini-Circuits in hermetically-sealed TO-8 cases and SMA connectorized packages. In each package style, five models are offered, each with three internal...
You must be logged in to post a comment.