by minicircuitsadmin | Nov 15, 2022 | Amplifiers, Attenuators, Engineering Resources, Filters, Fixed Attenuators / Terminations, Frequency Mixers
A prior article in this series explained cascade analysis of noise level, noise floor, bandwidth and signal-to-noise ratio for a simple RF front end with a single gain stage. In this application note, we’ll build on the same concept to guide the designer though...
by minicircuitsadmin | Jan 7, 2022 | Amplifiers, Engineering Resources
Kit Cox, Field Applications Engineer, Mini-Circuits Japan Background: Why the LNA Matters A low-noise amplifier (LNA), which Mini-Circuits defines as any amplifier with a noise figure (NF) below 3 dB, should usually be used at the front end of an RF or microwave...
by minicircuitsadmin | Apr 26, 2015 | Amplifiers, Engineering Resources
GSM-EDGE Drop-In Low Noise Amplifier Module Mini-Circuits TAMP-960LN+ ultra-low noise drop-in amplifier module is an ideal low noise amplifier for use in GSM-EDGE base station or tower mounted low noise applications. THE TAMP-960LN+ provides an optimized combination...
by minicircuitsadmin | Apr 21, 2015 | Amplifiers, Engineering Resources
Mini-Circuit’s Blue Cell Technology allows the use of its 90° splitters to enhance the performance of a family of medium power amplifiers. Balanced amplifier configurations offer several performance advantages when compared to single-ended designs. The foremost...
by minicircuitsadmin | Apr 14, 2015 | Amplifiers, Engineering Resources
LTE Base Station MMIC Amplifier Mini-Circuits PMA-545+ high dynamic range and super low noise MMIC amplifier is designed specifically for applications which require high linear performance, particularly wideband, advanced digital communications systems such as LTE...
You must be logged in to post a comment.